Skip to content
Solar PV · Analysis · United States & India

How far apart should solar panel rows be? Spacing by latitude

To keep tilted solar rows unshaded from 9 am to 3 pm on the shortest day, space them about 1.4-1.7 times their slope length at 30 degrees latitude, 1.7-2.2 times at 40 degrees and 2.7-3.7 times at 50 degrees (15-25 degree tilt). The common noon-only formula leaves rows shading each other all winter morning and afternoon.

Reviewed by Pruthvi A. · 6 min read
Close-up of solar modules

In 50 words: To keep tilted solar rows unshaded from 9 am to 3 pm on the shortest day, space them about 1.4-1.7 times their slope length at 30 degrees latitude, 1.7-2.2 times at 40 degrees and 2.7-3.7 times at 50 degrees (15-25 degree tilt). The common noon-only formula leaves rows shading each other all winter morning and afternoon.

On a flat roof or a ground mount, every row of tilted panels casts a shadow on the one behind it. Spacing the rows further apart reduces that shade but uses more space. Most guides give one formula, based on the sun at noon on the shortest day. We computed spacing from NOAA's solar position equations for a range of latitudes and design windows, and checked how much shade each choice leaves through the year. Try your own layout in the solar panel row spacing calculator.

The noon-only formula, and why it is not enough

The usual rule sets the row pitch (leading edge to leading edge) so that the noon shadow on December 21 just reaches the next row: pitch = L x [cos(tilt) + sin(tilt) / tan(noon sun altitude)], where L is the row's slope length. At 40 degrees north, a 2 m row at 30 degrees tilt needs 3.73 m by this rule.

The catch is that on the shortest day the noon shadow is the shortest of the day. Before and after noon the sun is lower, and even though it moves to the east or west, the part of the shadow that falls toward the next row is longer. So rows spaced by the noon rule shade each other for the whole of the solstice day except the moment of noon. Across the year, our calculation finds some row-to-row shade in 11-21% of daylight hours at noon-only spacing, depending on latitude.

Spacing by latitude for a 9 am-3 pm window

Row pitch as a multiple of the row's slope length, for rows facing the equator, kept unshaded from 9 am to 3 pm solar time on the shortest day. Ground coverage ratio (GCR) is slope length divided by pitch.

Latitude15° tilt25° tilt35° tiltGCR at 25° tilt
20°1.291.441.540.70
25°1.361.541.690.65
30°1.441.681.880.59
35°1.561.882.140.53
40°1.742.172.530.46
45°2.042.673.210.38
50°2.703.734.650.27
55°5.197.8010.170.13

Two patterns stand out. Lower tilt allows much tighter rows, because the row is shorter and casts a shorter shadow. And spacing climbs steeply past about 45 degrees, where the winter sun barely clears the horizon at 9 am and 3 pm. At 55 degrees (Edinburgh, Moscow), a 9-3 window is impractical; a 10 am-2 pm window or a low tilt is the realistic choice.

How much the window matters

Pitch as a multiple of slope length at 25 degrees tilt:

LatitudeNoon only10 am-2 pm9 am-3 pm
20°1.311.351.44
30°1.481.551.68
40°1.751.882.17
50°2.332.683.73

And the share of daylight hours across a year with some row-to-row shade, at noon-only spacing against 9 am-3 pm spacing (the share is the same at every tilt, because the spacing scales with the row):

LatitudeNoon-only spacing9 am-3 pm spacing
20°20.7%11.3%
30°18.7%9.4%
40°16.7%7.4%
50°13.5%4.1%
55°11.3%2.0%

These are hours with any shade on the bottom edge of the next row, not energy lost. Most of them fall early and late in winter days, when the sun is low and output is small. But partial shade can cost more than its area suggests, because cells in series are held back by the most shaded cell, so designers usually aim for a shade-free window rather than accept some shade at all hours.

A worked example

A ground mount in New York (40.7 degrees north) with 2 m rows at 25 degrees tilt:

  • Noon-only rule: 3.56 m pitch. Rows are shaded all of December 21 except noon.
  • 9 am-3 pm window: 4.45 m pitch, a 2.63 m clear gap between rows and a ground coverage ratio of 0.45. On December 21, 3.0 of the 9.0 daylight hours have row-to-row shade (before 9 and after 3). There is none from March to September, and 7% of the year's daylight hours have some shade.

The southern hemisphere

The geometry is the same, mirrored. South of the equator the panels face north and the shortest day is June 21, so a site at 34 degrees south (Sydney, Cape Town) needs the same spacing as one at 34 degrees north (Los Angeles). The row spacing calculator takes negative latitudes.

What this does not cover

  • Sloping ground. A slope toward the equator lets rows sit closer; a slope away from it needs more space.
  • Row ends and short rows. We treat rows as long. Short rows let more light round the ends.
  • Trackers. Single-axis trackers rotate east-west, so their spacing follows a different calculation (backtracking angles).
  • Local rules. Roof setbacks, walkways, wind and snow loads and fire access can all set a minimum gap.

How we calculated it

We used NOAA's solar declination series and the standard solar zenith and azimuth relations, worked in local solar time so that longitude and time zone drop out. For each moment, the shadow cast toward the next row is the row's height times the sun's horizontal component toward the equator divided by its vertical component. The pitch is the row's ground depth plus the longest such shadow within the chosen window on the shortest day. Shaded hours scan the 21st of each month in 5-minute steps.

Frequently asked questions

How far apart should solar panel rows be?

For a 9 am-3 pm shade-free window on the shortest day, about 1.4-1.7 times the row's slope length at 30 degrees latitude, 1.7-2.2 times at 40 degrees and 2.7-3.7 times at 50 degrees, for tilts of 15-25 degrees. Steeper tilts need more space.

Is the noon shadow formula for row spacing correct?

It is correct for the moment of noon only. On the shortest day the noon shadow is the shortest of the day, so rows spaced by that rule shade each other the rest of the day. Use a window, such as 9 am-3 pm, for the design.

Does a lower tilt let me fit more panels?

Yes. A lower tilt makes each row shorter and its shadow shorter. At 40 degrees latitude a 15-degree tilt needs a pitch of about 1.74 times the slope length for a 9-3 window, against 2.17 at 25 degrees, at the cost of a little output per panel.

Is row spacing different in Australia?

Only in direction. Panels face north, the shortest day is June 21, and the same latitude gives the same spacing as in the northern hemisphere.

Free toolEstimate your solar system size, cost and paybackOpen solar calculator →

Sources

  1. NOAA Global Monitoring Laboratory, General Solar Position Calculations
EE
About the authorEarth Energy Log Editorial DeskArticles are researched and drafted by the Earth Energy Log desk with AI assistance, checked against primary sources, and reviewed by a named editor before publication.More from Earth Energy Log Editorial Desk →

Researched and drafted by the Earth Energy Log Editorial Desk with AI assistance. Reviewed by Pruthvi A. before publication.

How we work: Editorial standards · AI disclosure · Report an error

More in Solar PV

Newsletter

The weekly brief

Every Tuesday: the 5 stories that matter, India tender awards roundup, one chart we made. Free.

No spam. Unsubscribe in one click.