Solar panel row spacing calculator
Most row spacing formulas use the sun at noon on the shortest day. That spacing only works at noon: before and after it, the front row shades the next one all day on the solstice. Pick how many hours either side of noon you want shade-free, and see the row pitch, the gap and how many hours of row-to-row shade remain each month.
Sets the latitude. Pick Custom to enter your own.
Distance from the bottom to the top edge of the tilted row: one panel's length in portrait, its width in landscape, or more for stacked panels.
Solar time: noon is when the sun is highest. The shortest day is December 21 north of the equator and June 21 south of it.
Leading edge to leading edge. Leave at 0 to use the calculated pitch.
Row spacing: New York, 40.7°N
- Row pitch (leading edge to leading edge)
- 4.45 m
- Clear gap between rows
- 2.63 m
- Ground coverage ratio
- 0.45
- Height of the top edge
- 0.85 m
- Pitch from the usual noon-only formula
- 3.56 m
Counts any time the shadow reaches the bottom edge of the next row. Shade in the first and last hour of the day costs little energy, but a strip of shade on the bottom edge can cost more than its area suggests, because cells in series are held back by the most shaded cell; how much depends on the panel's bypass diodes and whether it is mounted in portrait or landscape. Rows are treated as long and facing the equator.
Shade at this pitch
- Pitch checked
- 4.45 m
- Hours of row-to-row shade on the shortest day
- 3.0 h / 9.0 h
- Share of daylight hours with some row-to-row shade
- 7.0%
Row-to-row shade on the 21st of each month
- Month
- Shaded hours / daylight hours
- Jan
- 2.3 h / 9.5 h
- Feb
- 1.2 h / 10.7 h
- Mar
- 0.0 h / 12.0 h
- Apr
- 0.0 h / 13.3 h
- May
- 0.0 h / 14.5 h
- Jun
- 0.0 h / 15.0 h
- Jul
- 0.0 h / 14.5 h
- Aug
- 0.0 h / 13.5 h
- Sep
- 0.0 h / 12.2 h
- Oct
- 1.2 h / 10.8 h
- Nov
- 2.5 h / 9.7 h
- Dec
- 3.0 h / 9.0 h
Defaults and sources
- Solar position
- Declination series and solar zenith/azimuth equations; worked in local solar timeNOAA Global Monitoring Laboratory, General Solar Position Calculations · checked Nov 16, 2026
How the calculator works
The sun's position comes from NOAA's solar position equations, worked in local solar time, so no longitude or time zone is needed. Panels face due south north of the equator and due north south of it.
A row of slope length L at tilt T rises L x sin(T) and covers L x cos(T) of ground. Its shadow toward the next row, at any moment, is that height times the sun's horizontal component toward the equator divided by its vertical component. The pitch is the row's ground depth plus the longest such shadow during your chosen window on the shortest day.
Shaded hours scan every 5 minutes of the 21st of each month and count the time the shadow reaches past the gap. Rows are assumed long enough that end effects do not matter, on level ground.
Solar row spacing: common questions
How far apart should solar panel rows be?
It depends on latitude, tilt and how many winter hours you want shade-free. For a 9 am-3 pm shade-free window on the shortest day, the pitch is about 1.4-1.7 times the row's slope length at 30 degrees latitude and 15-25 degrees tilt, about 1.7-2.2 times at 40 degrees, and 2.7-3.7 times at 50 degrees.
What is wrong with the noon-only row spacing formula?
It only protects the moment of solar noon. On the shortest day the noon shadow is the shortest of the day, so rows spaced by that rule shade each other all day except at noon. Across a year, our calculation finds some row-to-row shade in 11-21% of daylight hours at noon-only spacing, against 2-11% for 9 am-3 pm spacing, depending on latitude.
What ground coverage ratio should I use?
Ground coverage ratio is row slope length divided by pitch. Keeping 9 am-3 pm shade-free on the shortest day gives about 0.6-0.7 at 30 degrees latitude, 0.45-0.6 at 40 degrees and 0.27-0.37 at 50 degrees for tilts of 15-25 degrees. Lower tilts allow tighter rows.
Does row spacing work the same in Australia?
Yes, mirrored. South of the equator panels face north and the shortest day is June 21, so the same latitude gives the same spacing. The calculator handles both hemispheres; enter a negative latitude for the south.