In 50 words: At SBI's October 2026 rates, a 3 kW PM Surya Ghar system at ₹50,000 per kW has a 10-year EMI of about ₹1,500, against a bill saving near ₹2,100 a month. Above about 4.4 kW the loan crosses ₹2 lakh and the rate jumps from 6.00% to 8.15%.
Search for the EMI on a PM Surya Ghar solar loan and you will find figures from ₹900 to over ₹3,000 a month for the same 3 kW system. They differ because each assumes a different interest rate, tenure and loan size, and most are from before SBI's October 2026 rates. This guide uses one set of current, official numbers so you can compare sizes on equal terms, and answers the question that matters: will the EMI be smaller than the saving on your bill?
Run your own numbers in the PM Surya Ghar subsidy calculator.
The loan terms in 2026
State Bank of India lists these terms for its PM Surya Ghar rooftop solar loan, effective October 15, 2026:
| Term | SBI PM Surya Ghar loan |
|---|---|
| Interest, loans up to ₹2 lakh | 6.00% (floating, EBLR minus 2.15%) |
| Interest, loans above ₹2 lakh up to ₹6 lakh | 8.15% (floating, EBLR) |
| Maximum loan | ₹6 lakh |
| Your contribution (margin) | At least 10% of the project cost |
| Repayment | Up to 120 months, including a 6-month moratorium |
The subsidy does not reduce the loan up front. MNRE pays the central financial assistance (CFA) to your bank account after the system is installed and inspected, so the loan is sized on the full cost.
EMI and bill saving by system size
Assumptions for every row: ₹50,000 per kW installed (MNRE's benchmark for the first 2 kW; quotes vary), a loan of 90% of the cost, a 10-year EMI, generation of 100 units per kW per month (PIB says a 3 kW system generates over 300 units a month on average) and a bill rate of ₹7 per unit, with all units used at home.
| Size | Installed cost | Central subsidy | Loan | Rate | EMI, 10 years | EMI if subsidy prepays the loan | Units a month | Bill saving a month |
|---|---|---|---|---|---|---|---|---|
| 1 kW | ₹50,000 | ₹30,000 | ₹45,000 | 6.00% | ₹500 | ₹167 | 100 | ₹700 |
| 2 kW | ₹1,00,000 | ₹60,000 | ₹90,000 | 6.00% | ₹999 | ₹333 | 200 | ₹1,400 |
| 3 kW | ₹1,50,000 | ₹78,000 | ₹1,35,000 | 6.00% | ₹1,499 | ₹633 | 300 | ₹2,100 |
| 4 kW | ₹2,00,000 | ₹78,000 | ₹1,80,000 | 6.00% | ₹1,998 | ₹1,132 | 400 | ₹2,800 |
| 5 kW | ₹2,50,000 | ₹78,000 | ₹2,25,000 | 8.15% | ₹2,748 | ₹1,795 | 500 | ₹3,500 |
| 10 kW | ₹5,00,000 | ₹78,000 | ₹4,50,000 | 8.15% | ₹5,495 | ₹4,543 | 1,000 | ₹7,000 |
At these assumptions the bill saving is larger than the EMI at every size. The margin is widest at 1-3 kW, where the subsidy is a large share of the cost, and narrows as the system grows, because nothing beyond 3 kW is subsidised and larger loans pay the higher rate.
The saving only holds if you use the units. A household that uses 200 units a month and installs 5 kW exports the surplus, which earns whatever your state's net metering or net billing rules pay, often less than the bill rate. Check your state's rules before sizing above your use.
The ₹2 lakh line
SBI's rate depends on the loan amount, not the system size. With a 10% margin at ₹50,000 per kW, the loan crosses ₹2 lakh at about 4.4 kW, and the rate rises from 6.00% to 8.15%.
On a 5 kW system that costs about ₹250 a month, or about ₹30,000 over ten years, compared with borrowing the same ₹2.25 lakh at 6.00%. Two ways to stay under the line:
- Pay a larger margin. Putting ₹50,000 down on a ₹2.5 lakh system keeps the loan at ₹2 lakh and the rate at 6.00%, an EMI of about ₹2,220.
- Size to your use. If your bill shows under 400 units a month, a 4 kW system may cover it with a loan under ₹2 lakh.
Using the subsidy to prepay
The subsidy arrives after commissioning. If you put it straight into the loan, the EMI on a 3 kW system falls from about ₹1,499 to about ₹633 at the same tenure. Ask your bank whether a part-prepayment cuts the EMI or the tenure; banks handle it differently, and either option saves interest.
How subsidy amounts work
MNRE's guidelines set the central subsidy by capacity: ₹30,000 per kW for the first 2 kW and ₹18,000 for the third, so ₹78,000 is the most a household can get. Part-kW counts: 2.5 kW gets ₹69,000. In special category States and UTs (Uttarakhand, Himachal Pradesh, J&K, Ladakh, the North-Eastern States including Sikkim, Andaman & Nicobar and Lakshadweep) the rates are ₹33,000 and ₹19,800, up to ₹85,800.
Some states add a top-up of their own. Amounts change, so confirm with your state nodal agency or DISCOM and enter the figure in the calculator.
Checklist before you sign
- Read your bill: average monthly units over a year decides the right size. PIB's guide: up to 150 units, 1-2 kW; 150-300 units, 2-3 kW; above 300, more than 3 kW.
- Get the quote per kW: compare it with MNRE's ₹50,000 per kW benchmark.
- Check the loan amount against ₹2 lakh: a little more margin may keep you at 6.00%.
- Ask about prepayment: plan to put the subsidy into the loan when it arrives.
- Confirm export payment: if you size above your use, know what surplus units earn in your state.
Related
Sources
Researched and drafted by the Earth Energy Log Editorial Desk with AI assistance. Reviewed by Pruthvi A. before publication.
How we work: Editorial standards · AI disclosure · Report an error



