Skip to content
Free tools

Solar panel CO2 savings calculator

How much carbon solar saves depends far more on your grid than on your panels: each kWh displaces 0.11 to 0.70 kg of CO2e depending on the region at EPA's average rates, and more at the rates for the plants that run less often. Pick your state for output and your eGRID region for emissions, and see the yearly saving, the lifetime saving after the panels' own manufacturing emissions, and the carbon payback.

PVWatts output for a south-facing 20 degree roof in one major city per state.

Find yours from your ZIP code with EPA's Power Profiler. US average if unsure.

7.2 kW was the median US home system in 2024 (Berkeley Lab).

From your installer's estimate or inverter app. Leave at 0 to use the state figure.

NREL's median of field studies is 0.5% a year.

Emissions avoided: US average

Solar output, year one
10,231 kWh
Average rate / non-baseload rate
771 lb/MWh / 1,379 lb/MWh
CO2e avoided per year
3.6 t / 6.4 t
Panels' own life cycle emissions
8.1 t
Carbon payback
27 months / 15 months
Net CO2e avoided over the period (25)
76.0 t / 142.3 t
Same as not driving (miles a year)
8,944 / 16,001

Average rates spread emissions over all generation in the region; non-baseload rates reflect the plants that vary output and are a closer guide to what solar displaces. Life cycle emissions use IEA PVPS's 42.9 g CO2e/kWh for European rooftop mono-Si, converted to about 1,127 kg per kW.

Defaults and sources

Grid emission rate by eGRID subregion
eGRID2023 total output and non-baseload output emission rates, CO2e (lb/MWh), by subregion; US total output 770.9 lb/MWhUS EPA, eGRID 2023 Summary Tables (revision 2, June 12, 2025), Tables 1 and 3 · checked Nov 16, 2026
Find your subregion
EPA's Power Profiler looks up your eGRID subregion from your ZIP codeUS EPA, Power Profiler · checked Nov 16, 2026
Solar's own life cycle emissions
42.9 g CO2e per kWh for a residential mono-Si rooftop system (975 kWh/kWp a year, 30 years, 0.7%/yr degradation)IEA PVPS Task 12, Environmental life cycle assessment of electricity from PV systems, 2021 data update (fact sheet, 2022) · checked Nov 16, 2026
Median field degradation (literature review)
0.5% per year: median of nearly 2,000 degradation rates measured on modules and systems in the fieldJordan and Kurtz, Photovoltaic Degradation Rates - An Analytical Review (NREL/JA-5200-51664, Progress in Photovoltaics) · checked Nov 15, 2026
Car comparison
The average passenger vehicle emits about 400 g of CO2 per mile (4.6 t a year at 11,500 miles)US EPA, Greenhouse Gas Emissions from a Typical Passenger Vehicle · checked Nov 16, 2026

How the calculator works

Year-one output is your system size times PVWatts' yearly output per kW for your state, unless you enter your own figure. Each later year loses the degradation rate.

Avoided emissions are output times the eGRID2023 CO2e rate for your subregion: the total output rate (average of all generation) and the non-baseload rate (plants that ramp up and down). EPA recommends subregion rather than state rates for electricity use, because states trade power.

The panels' own emissions come from IEA PVPS Task 12: 42.9 g CO2e per kWh for a residential mono-Si rooftop system producing 975 kWh per kWp a year for 30 years with 0.7% yearly degradation, which is about 1,127 kg CO2e per kW. Carbon payback is that amount divided by the yearly saving; the lifetime figure subtracts it. The car comparison uses EPA's 400 g of CO2 per mile for the average passenger vehicle.

Solar CO2 savings: common questions

How much CO2 do solar panels save?

It depends on the grid. At EPA's eGRID2023 average rates, each kWh of solar avoids about 0.35 kg of CO2e in the US as a whole, from 0.11 kg in upstate New York to 0.70 kg in Puerto Rico, and more at non-baseload rates. A 7.2 kW system in Texas avoids about 3.4 to 5.8 t a year.

How long do solar panels take to pay back their carbon?

Usually one to four years. A 7.2 kW system pays back its manufacturing emissions in about 11-17 months in Missouri, 16-42 months in Oregon and 26-42 months in Massachusetts, using eGRID average and non-baseload rates and IEA PVPS life cycle emissions.

Why use eGRID subregions instead of states?

Because states buy and sell power across their borders. A state's own generation can be much cleaner or dirtier than the power its homes use: Vermont's in-state generation emitted 52 lb CO2e per MWh in 2023, while the New England grid it draws from averaged 543 lb. EPA recommends subregion rates for electricity use.

Should I use the average or the non-baseload rate?

Both are shown because neither is exact. Solar mostly displaces plants that change their output during the day, which the non-baseload rate represents, but the mix it displaces shifts as more solar and storage join the grid. EPA's AVERT tool models displaced emissions in detail for larger projects.

Related

Newsletter

The weekly brief

Every Tuesday: the 5 stories that matter, India tender awards roundup, one chart we made. Free.

No spam. Unsubscribe in one click.